May want to add an “important” bullet point about the overlapping of the two pieces as it’s not easy to see in the video.
Video is too fast it’s difficult to see what parts need to inserted and what orientation. I had to watch the video several times to understand what parts are needed and what orientation.
It would be helpful to use a different color background so you can see how Part 10 is orientated better. The background causes part 10 to blend into the background and makes it difficult to see the overlap. I had to watch several times to see the correct orientation.
Video could be slowed down a bit as i had to watch it several times to understand what was being illustrated.
Also would be helpful to indicate what color the fastener is if the RepKord box will be coming with two different color fasteners now.
It would help to slow the video down a little bit as I had to watch this one several times to figure out how everything was assembled together.
The video is diffidently too fast to tell what orientation the printed brackets are supposed to be placed in. I would recommend indicating the color of the hardware if all rep boxes now come with black M3 X16 fasteners.
Video could be slowed down to better illustrate orientation and use a different color filament.
What size Phillips? OOOO, OOO, OO, O, 1, 2, 3, 4? Or a Japanese Phillips (aka JIS) and if so what size? Is it supposed to be a pozidrive Phillips? If so what size?
Page 1 of 2
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like: