RepBox v2.5.x Build Guide 1: Pre-Build Preparation

Written By: Pooch (and one other contributor)
  • Comments: 1
  • Favorites: 0

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

Flags

0

Introduction

This guide will provide assembly instructions for:

v2.5

v2.5.1

v2.5.2

  1. We highly recommend you use these three additional resources for the build: Assembly Video: https://youtu.be/GhOFIa803xQ Interactive CAD Model v2.5.0: https://repkord.com/RB2Model
    Edit

  2. For this build you will need a phillips head screwdriver, flush cutters, and optionally some needle nose pliers.

    • For this build you will need a phillips head screwdriver, flush cutters, and optionally some needle nose pliers.

    • The printed Bill of Materials is very helpful to the assembly process.

    Edit

  3. Unboxing and prep associated with this build.

    • Unboxing and prep associated with this build.

    Edit

  4. All clear acrylic panels come from the factory with a protective film on BOTH SIDES of the panel. Be sure to remove it all prior to assembly.

    • All clear acrylic panels come from the factory with a protective film on BOTH SIDES of the panel. Be sure to remove it all prior to assembly.

    • NOTE: The color of your protective film may be a different color than the clear you see here. This is normal. The acrylic underneath is still the same clear in the finished product.

    Edit

  5. The color of components included with the RepBox will vary based upon the 'flavor' purchased. IMG 1 - Identify the six parts shown.

    • The color of components included with the RepBox will vary based upon the 'flavor' purchased.

    • IMG 1 - Identify the six parts shown.

    • IMG 2 - Locate these two part sets. Each part is connected with small strips to keep them from becoming lost.

    • You can separate these parts from the strips either by hand or trimming them clean with flush cutters.

    • Suggestion: You can also leave the parts on the strips for the moment. Then just cut them loose right as they're needed.

    Edit

  6. In the following instructions, all parts will shown in a contrasting color to help distinguish one part from another during assembly. The actual parts included with the kit will be Clear Acrylic. IMG 1 - RepBox shown in Clear Acrylic RepBox

    • In the following instructions, all parts will shown in a contrasting color to help distinguish one part from another during assembly. The actual parts included with the kit will be Clear Acrylic.

    • IMG 1 - RepBox shown in Clear Acrylic RepBox

    • IMG 2 - RepBox shown in contrasting colors.

    Edit

  7. IMG 1 - Both of these parts (Item 18 & 26) are included within the Parts Tube if you have v2.5.0 IMG 2 - This part (Item 26) is included within the Parts Tube if you have either v2.5.1 OR v2.5.2. In either case, do not cut off the tabs (circled in yellow) on either end of Item 26.

    • IMG 1 - Both of these parts (Item 18 & 26) are included within the Parts Tube if you have v2.5.0

    • IMG 2 - This part (Item 26) is included within the Parts Tube if you have either v2.5.1 OR v2.5.2.

    • In either case, do not cut off the tabs (circled in yellow) on either end of Item 26.

    Edit

  8. IMG 1 - Your RepBox comes equipped with our new Slip Rod system. It is designed so that you can easily move spools in/out of the box and reposition them simply. For the majority of plastic spools you should have a nice slick surface for them to slip & slide on. IMG 2 - Additional Spool and Roller options!

    • IMG 1 - Your RepBox comes equipped with our new Slip Rod system. It is designed so that you can easily move spools in/out of the box and reposition them simply. For the majority of plastic spools you should have a nice slick surface for them to slip & slide on.

    • IMG 2 - Additional Spool and Roller options!

    Edit
Finish Line

Author

with 1 other contributor

Pooch

Member since: 09/15/2018

2,505,393 Reputation

55 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 16

All Time: 1,438