5: Optional Humidity Hunter Kit

Install your humidity hunter kit as shown here.

Set the C/F on your hygrometer as you prefer.

If you have the double "R" plug in place remove it now.

Due to some variances in supply the diameter of the hygrometers can vary slightly and affect the fit in the lid hole. Make sure you've cleaned any remaining acrylic tabs from the hole so the hygometer can snap in place. If need be you can shave down the tabs on the hygrometer slightly using a hobby knife or flush cutters for a better slip fit.

If you find the hygrometer to be too lose you can snug it up by adding a piece of tape around the outside of it for a better friction fit or by using a little silicone around the flange to hold it in place.