-
-
Pic 1. Required parts for the rollers. Bearing Bag, Roller Hardware Bag, 16 roller panel set and 3 roller panel set punch-outs.
-
Remove the roller panels from their punch-outs as shown in pic 2.
-
You can see this step in the assembly video at the 40:38 timestamp. https://youtu.be/nZ5MGGcn6jw
-
-
-
Do this twice for the rollers that go on each end of the box.
-
-
-
Do this twice for the rollers that go on each end of the box.
-
-
-
Double rollers go in the middle of the box and are shared by two adjacent spools.
-
You will be building 5 of these.
-
-
-
Same process as the end rollers but with a second layer on top.
-
-
-
Install in the box spaced out to fit the spools you're installing in the box.
-
Done! If you have other options like the Seal Kit or Humidity Hunter kit. See the corresponding guides on the main menu.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
