Tom Barrett

Also, large variation in 3d printed sealing bars. One the slots for the square nuts was a perfect fit and through holes were through.

The other one, the slots were so loose nuts kept falling out and through holes weren’t through so I had to drill them out.

This step is really confusing. Where to put the 10mm bolts and the 16mm bolt(s)?

I didn’t receive any 10mm bolts, even though it was checked off on the packing list.

I found 16mm were too long for the top, 10mm too short for the bottom. 12mm worked well for both top and bottom. Glad I have a stock in 2mm increments!