Pending Edits to Installation Options & Overview

Edited Apr 21, 2022 by William Youngman (5m)

(You don’t have enough reputation to patrol this edit.)

	[title] Process Overview
	[* 10] *OPTIONAL:* Print and install the latest parts to upgrade your machine to the latest MK3S+ variant. Since you're already going to need to take apart your hotend to do this upgrade this may be a good time to upgrade the hardware to the latest + revision.
	[* 10] *OPTIONAL:* Upgrade your Prusa MK3/S/+ to its latest firmware.
	[* 1] Install the REVO 6 kit using the method of installation that's best for you as outlined below.
	[* 1] Re-set your PINDA height and re-do your first layer calibration.
	[* 1] Run a PID tune to calibrate your Prusa with the new E3D REVO™ harware.
	[* 1] Profit.
-	[* 10] *HIGHLY RECOMMENDED: *Some additional things to perform post install- Check your nozzle size setting in HW Setup menu if changed. Run the following Calibrations: Self Test, Full XYZ calibration, Temp Calibration, First Layer Calibration.
+	[* 10] *HIGHLY RECOMMENDED: *Some additional things to perform post install- Check your nozzle size setting in HW Setup menu if changed. Run the following Calibrations: Self Test, Full XYZ calibration, Temp Calibration, PINDA Calibration and First Layer Calibration.